DDiSoEsT Geschrieben 19. Dezember 2017 Teilen Geschrieben 19. Dezember 2017 (bearbeitet) I got 3 cards of 570s, a single msi 570 x gaming (hynix) which currnetly gives me 28.5mhs and 860 decr, when dual mining, with only a modded bios.. The two msi 570 armor (elpida) versions) both have the same 1000mv undervolt bios installed and no afterburner configuration or anything else. One giving me 24,3 eht and 710 dec, the other only 21,0 eth and 630 dec. Latest blockchain drivers (17.30 or sth.) Win 10 64-Bit Awesomeminer using Claymores Dualminer. Any guesses whats wrong there? Maybe bad timings in modded bios? Cause at Stock at the 24ish card i get 16ish and at the 21ish card i got stock 21 aswell... Sorrey för ma badd Inglisch Btw on cryptonight all cards reach between 730 and 790 h/s, at 370 W which is more than whattomine.com says, so i thing thats actually good, but eth with these 3 only 73 instead of 84???! Please help me Ps.: My afterburner Version 4.4.0 doesnt let me change voltages, even if i activate it in the settings menu. Also if i change memory speeds, i see no improvement of hasrates.. Bearbeitet 19. Dezember 2017 von DDiSoEsT Link zu diesem Kommentar Auf anderen Seiten teilen Mehr Optionen zum Teilen...
R0land Geschrieben 19. Dezember 2017 Teilen Geschrieben 19. Dezember 2017 Eventuell wäre es hilfreich die Frage auf deutsch zu formulieren ! Link zu diesem Kommentar Auf anderen Seiten teilen Mehr Optionen zum Teilen...
hagbase Geschrieben 19. Dezember 2017 Teilen Geschrieben 19. Dezember 2017 Which Windows Version? 1703 or 1709(FCU), some ppl report decreased hasrate with Win 1709. Anorak Bios or did you just copy your straps or used one click timing patch? GPUClock/MemClock settings? Latest Driver? 17.12.1 or Beta Blockchain driver Aug23? Try this instead of Afterburner : https://forums.guru3d.com/threads/overdriventool-tool-for-amd-gpus.416116/ Link zu diesem Kommentar Auf anderen Seiten teilen Mehr Optionen zum Teilen...
DDiSoEsT Geschrieben 19. Dezember 2017 Autor Teilen Geschrieben 19. Dezember 2017 i got the aug 23 blockchaindrivers and i dont see any wattman settings i could use, searched for them alrdy.. i didnt modify the timings, do you think that will be the issue? Maybe wrong timings in the modded bios? Link zu diesem Kommentar Auf anderen Seiten teilen Mehr Optionen zum Teilen...
hagbase Geschrieben 19. Dezember 2017 Teilen Geschrieben 19. Dezember 2017 To reach max. performance you need to mod your Vbios. Either use one of Anoraks files if there is one for your gpu or use polaris editor with one click timing patch and adjust your gpuclock/memclock/voltage. https://anorak.tech/c/downloads https://github.com/jaschaknack/PolarisBiosEditor Save your Vbios with https://www.techpowerup.com/download/ati-atiflash/ Don't use GPU-Z for Vbios backup or flash only for determine your gpu memory vendor! After flashing your gpus use DDU in windows safe mode to uninstall currentdriver/settings. Just choose clean and reboot. http://www.guru3d.com/files-details/display-driver-uninstaller-download.html Go to device manager, install Blockchain Beta Aug23 driver. If you get code 42/43 than apply PixelClockPatcher and reboot. https://www.monitortests.com/forum/Thread-AMD-ATI-Pixel-Clock-Patcher Use overdriveNtool for overclocking/undervolting. https://forums.guru3d.com/threads/overdriventool-tool-for-amd-gpus.416116/ Link zu diesem Kommentar Auf anderen Seiten teilen Mehr Optionen zum Teilen...
DDiSoEsT Geschrieben 20. Dezember 2017 Autor Teilen Geschrieben 20. Dezember 2017 Man ive been through this before i asked my question... Link zu diesem Kommentar Auf anderen Seiten teilen Mehr Optionen zum Teilen...
DDiSoEsT Geschrieben 20. Dezember 2017 Autor Teilen Geschrieben 20. Dezember 2017 Gerade eben schrieb DDiSoEsT: Man ive been through this before i asked my question... '' both have the same 1000mv undervolt bios installed '' Link zu diesem Kommentar Auf anderen Seiten teilen Mehr Optionen zum Teilen...
hagbase Geschrieben 20. Dezember 2017 Teilen Geschrieben 20. Dezember 2017 Well than just use overdriveNtool to apply your oc settings? Link zu diesem Kommentar Auf anderen Seiten teilen Mehr Optionen zum Teilen...
Empfohlene Beiträge
Erstelle ein Benutzerkonto oder melde Dich an, um zu kommentieren
Du musst ein Benutzerkonto haben, um einen Kommentar verfassen zu können
Benutzerkonto erstellen
Neues Benutzerkonto für unsere Community erstellen. Es ist einfach!
Neues Benutzerkonto erstellenAnmelden
Du hast bereits ein Benutzerkonto? Melde Dich hier an.
Jetzt anmelden